Thread: CV axle wont go All the way in Hub assembly on 99 Grandprix gtp :confused:

Originally Posted by GTPandGXPand Z28

yup its the right front passenger side, so the non sc grandprixs axles are shorter on the tip of the axle?

Actually the non - supercharged axles are longer because of a shorter differential. The main problem is the crappy imported Chinese axles they claim fit our cars and don't!

also I did have my tranny rebuilt about 2 years ago it was just a basic rebuild, I see what you guys are saying I'm going to take the parts I have and just stop by napa and compare them with what they have. hopefully I get this right today this is very stupid and frustrating going back and forth to the zone.. if I wasn't trying to buy a d-max I would just replace the whole dam tranny and axles on both sides.

Originally Posted by GTPandGXPand Z28

also I did have my tranny rebuilt about 2 years ago it was just a basic rebuild, I see what you guys are saying I'm going to take the parts I have and just stop by napa and compare them with what they have. hopefully I get this right today this is very stupid and frustrating going back and forth to the zone.. if I wasn't trying to buy a d-max I would just replace the whole dam tranny and axles on both sides.

Yup. I hear you on that one. I just rebuilt my transmission completely and replaced almost everything. It was.... a learning experience. haha Good luck!

and trying not to sound like a plug, but I have a brand new TRQ front hub assembly for $20 if you need one!