|
Pics won't load for me
It is off a 2006; supercharged.
It looks like it fits into a hole, just hope someone can answer.
^^ that. Or, looks like it could be from the inside of the car. From somewhere under the dash. That was my first thought. Looks like it's meant to swivel back and forth and has a stopper on that one side to prevent it from going too far...
I am 100% sure it came from the car, maybe somewhere in the starter / transmission area? possibly?
Really it could be from anywhere under the hood, as I had th eengien and transmission out, then split and , re-mated.
I think the one hole might be for a push-dart, maybe in the power steering area?
And for the reward, of viewing this thread > https://imgur.com/gallery/EVsshbd
Just wait for it.
It's impossible to get a good picture of it. Power Steering bracket. Below and between cylinders 2&4 attached to the transmission or block.
![]()
whatever it is it is not required because I left mine off because I couldn't find out where it went. LOL. My 04 didn't have it so I figured it was just a worthless bracket.
Interesting, that does seem to be it, I wonder if this is it in this pictures> https://imgur.com/NOOqwB5
I figure, I can set up the dart, as I know where it goes then see where the bracket lands, although, I am curios which bolt/nut is the right one.
Luckily, it have several vehicles, and this one has turned into a leisure thing.
Reach down there and shoot some more pictures?
Surely you need to pull that spar plug, for some reason.
Also my tab has grease on it so it's black, kinda throws visuals off.
Ok, I see several things going on there, it looks like it is sitting on a stud, with a nut then the power steering pressure side hose, has a dart, then the wiring harness has a tab, that goes int the bottom of the dart, after the bracket.
Sound right?
« Previous Thread | Next Thread » |