|
|
02-08-2009
hey guys this is my first post and i just need this settled i would like to know what size pulley i should be running. my mods are borla exh,cai,u-bend del,180 t-stat and a pcm. i know this is a sensitive subject and i do not want to destroy my pistons.thanks!!
02-08-2009
i run a 3.4 with that same stuff in my car basically
02-08-2009
you CAN run a 3.4, but it isnt recommended. you wont blow your engine or anything, but your car would be faster with a bigger pulley and more timing.
02-08-2009
mine runs fine with it and i beat all kinds of gtps with a bigger pulley and the same things so i dont know its up to
02-08-2009
No one can tell you what size pulley you need without scanning. You need a scan gauge before you can make that decision.
Everycar is different. Two cars with the SAME EXACT MODS can and WILL run totally different.
02-08-2009
that is true. a good friend of mine has the same exact car with the same exact things in it except mine is a 2 and his is a 97 and he has MSD wires and i dont, but we raced like 6 times last night and beat him everytime by at least a car
02-08-2009
2000* and mine is a 4 door and his a 2 door
02-08-2009
Like it has been said, timing=power. if you can run more boost and maintain the most timing, then great.
02-08-2009
With all my mods I still can see up to 4* knock retard. Altho it was only 40* out when I scanned it.
02-08-2009
thanks guys,what should i do next thats reasonable priced.should i go with colder plugs or ??
02-08-2009
You do not need colder plugs till you start dropping pulleys. There is a P-log for sale here for $90. That would probably be next for you unless you are planning on getting headers.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
