Thread: running hot...thoughts?

its normal, 04 up cars have higher temp fan settings, hook a scanner to the the obd port and read the temp there, the dash gauge is not accurate.

your gonna hit 217 degrees before the fans come on, high speed fans come on at 226.

its now 80 degrees out, aka summer hit you.

cars running good. thanks for asking. my temps went from 180 to 200 already in this heat we got here now, i got my fans tuned to 185 as well. stock 195 t stat.

your t stat dont open till it hits 195, so its a quick jump to 200 plus from there. and your fans dont even turn on till you hit 217.

You could also have a fan motor slowing down due to wear. But as mentioned, the halfway mark is no cause for alarm. You could be smelling air being pushed out of the recovery tank, too.

if you have a droid phone or tablet the torque app works well for showing more live data then you can shake a stick at. you also need a elm 327 obd2 bluetooth adapter fo rit to work.

theres one for the i fail too, it just dont scan for kr, what most of us care about most. dash commander iirc?

When you pressure tested the system did you also test the cap?

There can be a little learning curve on that whole bluetooth ODB thing. Its simple but stay way from the super-cheap adapters is my advice.

You could always drill and tap the manifold for a mechanical gauge, lol.

Originally Posted by SgtMarshal

I haven't heard too many issues with aftermarket thermostats, it's the temp gauges that I'm wary of.

I've had them stick open more than shut. But now theres the fail safe kind and thats what they do.

If one of the seals on the cap is bad that could cause the recovery tank to see more flow than normal, displacing more smelly air. I didn't mention pinhole leaks because you said it holds pressure but its possible for an air-only leak to exist, at a higher-up and farther from the heat point in the system like heater hose connections. Even then it might only leak when everything is hot and soft. But I'm no expert.

Just tossing out ideas.

Go for the $30 bluetooth adapters, not the $3 kind. Didn't work on mine and I have two 99s. Just sayin'

find an OEM cap. If you're smelling coolant and losing small amounts, but not leaking / dripping I'd suspect the cap too.

They get above the half mark before the fans come on. It's pretty normal especially if you aren't using the AC. I have had issues since getting my 05' where even on the freeway it will not cool enough to maintain a lower temp when the temp is over 85*. I can run down the freeway at 70 and the temp will climb up to 217 and then the temp will start to drop back down to about 200 then it will cycle between 200-217. I bought a tuner and set the low speed fans to come on at 210 and high speed at 217. During the "winter" my temps ran 186-188 with a 195* stat. now that it's getting hot the temp is about 190* in traffic with the AC running and when I get onto open freeway the temp climbs up to 210 before the fans take over. The halfway mark is right at 210 FYI. I use an Android phone and a BAFX ELM327 to monitor temps and all the other various things I want to watch while my Iphone stays in my pocket. You should be able to pick up a small tablet or an old phone to just run Torque Pro for monitoring car related things. It REALLY, REALLY, REALLY comes in handy. It is the best thing since sliced bread and really saves a lot of headaches trying to troubleshoot issues with any OBD2 car.


There's not really much for the IPhone I looked. Bosch has one out that you can buy from Hi Lo, but it's $99 and I have had a couple of friends that have mixed feeling about it. If you buy the BAFX one they are about $23 shipped and they are the only ones I don't hear people having issues with them. I bought one of the cheaper ones that was from the same seller as someone that bought it on here and it worked on everything EXCEPT GM. I ended up giving it away since it was a hassle to send back.

Jeff