Could not offer any advice. I never used it / didn't need to with either cam, rockers , pulley sizes or IC. I've always based my tune around my mods
Printable View
Could not offer any advice. I never used it / didn't need to with either cam, rockers , pulley sizes or IC. I've always based my tune around my mods
2 words
DOOOOOOOO ETT
Meth
Never found anyone saying I've used it for years and it works great.
I've used FSIC for years and they work great.
wheres the clearance issue with a fsic and a ssm90 set up?
if its the injectors cant the core be ground down some to clear it, kinda like what they do to the blower?
mr. IC leg humper in case you havnt noticed he CANT use a fullsize...............
im asking why?
Zzp said they have tried everything possible they can get the injectors in but the angle they are on you can't get it to idle right I guessQuote:
Originally Posted by Scottydoggs
Sent from my SM-G920V using Tapatalk
On a ssm90 the injectors occupy the space needed for the Intercooler core.
The shorts stack core is thinner and smaller and leaves room for the injectors also making its performance value smaller.
not you scott lol.....
because nitrous isn't used very often and people don't post results on nitrous setups very often does that mean it doesn't work?
I'm a leg humper because I've used Intercoolers and they work!Quote:
Originally Posted by Vet
Please educate us. If you run meth injection on a daily driver and it works great.
I try not to give advice if I don't no anything about it.
I can't think of his name atm, but the guy that bought adeckers old 04 did he at one time run a fsic with the ssm90 setup?
Frosty
Snowth1efQuote:
Originally Posted by Vet
dunno about him but this dude has a gen5 on a ssm90 setup......
Soooo gee um iff a gen5 fits im pretty sure a full size ic would fit by following this....
Has pics even.
Damn miracle when a person uses the search.....
http://www.grandprixforums.net/threa...-wouldent-work
Lol no it has nothing to do with a intercooler zzp machined the outside of my gen 3 case to fit for the injectors also you can't cut into the core that much without ruining it
Sent from my SM-G920V using Tapatalk
what i was saying, dont see why you cant just clearance the core for the injectors. a 1/2 area here and there should not hurt any thing.
Zzp said they tried they have ruined several intercoolers doing it I guess there isn't alot of room to grind anything off without getting into a coolant passage
Sent from my SM-G920V using Tapatalk
I don't know I'm not arguing just what I was told I wish someone has done it and informs me lol
Sent from my SM-G920V using Tapatalk
looking at this pic you'd have to take a nice chunk out of the core. another reason for l67 heads.
http://i.imgur.com/4amfPZ9l.jpg
this is my ic on a l67 lim and the rails laid on, it does look to be a ton of meat that could be dug into on the core.
http://i1097.photobucket.com/albums/...psojx9yhgp.jpg