Thread: I Need A Head Count For Headers

I'm looking to get a head count on how many would like custom headers made from 2 3/4" stainless tubing..Price would be around 170ish

So how many would buy at this price? All welding will be done by a qualified welder by the way

2 3/4" primaries?

Disregard 2.75". I need to call this place n double check

that's huuuuuuuuuuuuuuge.

1.75" primaries maybe. even those are pretty big for 'most' builds.

lol yeah 2.75" primaries won't work but it should be fine for the "collector" and dp, then a reducer or something

Primaries:
Speed Daddy: 1.5"
S&S: 1.625
SLPs: 1.625"
SAC/XS/DPP: 1.625"
TOG: 1.625"
Pacesetters/OBX: 1.625 or 1.75"
TOG Xtreme: 1.75"
ZZP: 1.75"
WBS: 1.75"
TOG Big Dog: 2.00"

If you did 2" and they fit nice... I might be down.

Will these be bolt in or weld in? Are they going to be knock offs of like the ZZP's or they going to be like the Speed Daddys?

btw, the S&S header design is the best. find a set, copy them with a larger pipe diameter.

They don't make those anymore I'm assuming.

Interested. Add me to the head count

Id buy a set, what ever happened to the TB adapters you were gonna make

If this is going to happen, then I would prob make it an option of weld in or bolt on. I'm still throwing the Idea around. And I don't remember ever making TB adapters lol

Originally Posted by SlowNA06

Primaries:
Speed Daddy: 1.5"
S&S: 1.625
SLPs: 1.625"
SAC/XS/DPP: 1.625"
TOG: 1.625"
Pacesetters/OBX: 1.625 or 1.75"
TOG Xtreme: 1.75"
ZZP: 1.75"
WBS: 1.75"
TOG Big Dog: 2.00"

If you did 2" and they fit nice... I might be down.

Arnt 2' primaries a little to big?

How do you figure?
Stock manifolds are something like 2.25" outer diameter, so 2" inner diameter will seal on the gaskets.

2" is probably too big.

even a 3" collector is too big for most, which is every set of headers except S&S.

I'm down if no welding is needed!

As long as they are bolt on, don't feel like welding, I'd be interested in a set. It's either yours or the speed daddy's on eBay lol