Thread: What did you do to your Car today?

Tore apart the top of the GTP again after doing the LIM job two weeks ago because I found a coolant mix inside the oil cap, turned out to be caused by a lack of RTV in the corners between the head and the block. But oh well it runs again.

Originally Posted by Matt Palm

dont get tire shine on this dip it will almost eat at it. the black will dull a lot and fade ask me how I know

Depends on the tire shine though....For instance I think I used this eagle one squirt bottle stuff and the instant you tried to wipe it on it would start to take off the plasti-dip. Recently, I noticed my wheels were really faded and horrible looking so I decided to try again only this time with the new Meguiars endurance gel. It made everything really black and super shiny!

I used the the turtle wax stuff you don't have to wipe off unless you want a matte look

Ok with brackets modded, seat fits, now just to put back together after another thing i want to do to them -

youre gonna paint the brackets white or blue aren't you....

Never thought about painting the brackets, but good idea.

Did the plasti dip thing on the wheels... It turned out like poo because it got cold. The first two looked okay, but after the second two looked so bad I'm just going to peel it off.

Sent from my Samsung Galaxy Note II

finally finished up with my friend and his new landscape trailer. all loaded up, ready to roll for its first monday of work.

we just had a list of this and thats to do today, made a single blower hook, mounted it and the double, with bungee cords and loops to strap the blower tight. the gas can rails to keep them tight to the wall, drilled and installed a few more screws in the weed whacker rack that moved a bit. added the 2x4's for wheel chocks for the mowers. then loaded it up.








we build 95% of everything thats holding tools and equipment to the walls, and the front shelves.

the 2 rake holders are store bought wall hangers, the rest we welded up and made out of metal stock.

Well got my new fogs put together finally and into the car!!! The are super de Dooper compared to the old! Now just need to get the bumper back together and the new fogs aimed properly

How do you aim the fogs? I noticed mine are aligned all weird since I replaced them with the new TYC units.

Roof Rails!!

Originally Posted by mrlogic1234

Did the plasti dip thing on the wheels... It turned out like poo because it got cold. The first two looked okay, but after the second two looked so bad I'm just going to peel it off.

Sent from my Samsung Galaxy Note II

Same here!!! Passenger side flawless but drivers is screwed lol

Originally Posted by stealthee

How do you aim the fogs? I noticed mine are aligned all weird since I replaced them with the new TYC units.

To be honest unless u have the gxp fogs I dunno. On the stock gxp ones there a hex bolt at the top that u screw in to raise the beam and unscrew to lower beam. On my new ones I modified to work on my car they have an adjuster on the back of them that I just screw in or out

Thanks, I'll have to take a closer look. I didn't see an adjuster when I put them in, but I wasn't really looking either. They probably adjust like the headlights do.

hit 133k miles
filled it with gas
finished polishing the 99 chevy project

phew...busy weekend.

Replaced window trim what a difference.Keeping up with my ride.

Originally Posted by gpse2000

Roof Rails!!

Everyone is getting roof rails but me...

but its okay. gonna go pick this guy up..
​2012 Chevrolet Silverado C1500 Lt - Peoria, AZ 85382 | CarSoup.com

You'll be doing trans work too on that with them big a$$ rims LOL^^

unless they are comparable to stock size.

Check out my what product to use I don't wanna blow up with pics again lol

Filled it up with 93 and took a long drive, and sold a set of roof rails, 1 more set to go