This is copy/paste from FB .. fixed up a little.
"Belt wrap kits. Last of the last here.
Flat rate shipping to the states. $13 via USPS.
Designed for use on GENV Blower. (Except for one)
Designed for use with full size (2.25" ) style intercooler.
Pulley of choice to use with this, works well for the 8 rib setup.
Suppose to work up to 3.25" blower pulley, but not 100% confirmed.
It will be a super tight fit at that size. But told should work.
Have to have Fuel logs setup. Stock setup makes for a fitment issue. Unless modified stock fuel rails to clear.
As can tell from pictures, its a tight fit, so big blower pulley wont work out to well, unless you go to smaller wrap pulley.
Included are some pics of part numbers of bolt/washers used for the pulley setup.
Depending on what you order, you will have to source your own parts.
Pulley used is part # 89016, can be bought about anywhere.
Strap will need trimmed and 2nd hole drilled to fit your setup. As there are different Alternator setups and different IC heights to deal with.
DOWN TO ONLY INCOMPLETE KITS!
***** THESE HAVE ALL SOLD OUT *******
(Prices went up a few $ since last update as I went out and bought parts to complete these out as best as possible)
For anyone who buys a kit with NO strap. It is not recommended to skip this part. Required to use this properly. This helps with the flex/force that will be put onto the bar itself. It is just a simple 1/8th inch aluminum with a twist in it. The twist makes for the transition needed for the bolts PLUS makes it much more rigged.
PAYPAL Only. Send as friend or family.
PM Me directly. First come first serve. Once gone, thread will be deleted, otherwise ill never stop hearing about these I will give you a paypal address. Won't be holding onto these.
No warranty/refund type deal. DIY type setup. Use at your own risk.
Ships out of ERLANGER, KY via FLATRATE USPS shipping box.
