Thread: Phenolic Intercooler for your Gen3/Gen5 M90, L67/L32 3800's - LOOK INSIDE

I've been thinking about installing an air temperature gauge post intercooler in the lower intake manifold. I'm looking for a kit that will have the sensor, wiring and display unit, preferably in a 2 1/16" size. I looked on autometers website and didn't see any specific air temp gauges, but maybe something else would work?

I was wondering if u still make the gen v to L67 adapter plates

Originally Posted by SgtMarshal

I've been thinking about installing an air temperature gauge post intercooler in the lower intake manifold. I'm looking for a kit that will have the sensor, wiring and display unit, preferably in a 2 1/16" size. I looked on autometers website and didn't see any specific air temp gauges, but maybe something else would work?

http://aeroforcetech.com/products_interceptor.html

You could get the aeroforce interceptor scan gauge for like $220 and it does a ton more than just the post intercooler air intake temp that your looking for. But for that to work you need to buy the extra kit on the aeroforce site This is what comes in it, I think its like $60. This is mine for my aero but haven't had a chance to install it yet. I want to do the same thing as you but am just to busy recently to get it finished.

Interested in what you have come up with since 2011 on the intercooler. Still selling? I am guessing fuel rails will be needed considering the higher height. Looking for a packaged deal.

can you PM me a packaged price please?

Might want to update your extra parts list. The Dorman 500-011 has been replaced with:
Dorman Help! 47080 Heater Hose Connector.

Originally Posted by ScottyDoggs

the price is all over this thread. first post has all you need to know. then hes got updates though all the pages



Gen 3 intercooler w/bolts and shipping $549(total price)
Gen 5 intercooler w/bolts and shipping $554(total price)
Machined Manifold $150 no core charge (shipping included w/ intercooler purchase)
Shipping, USPS (lower 48 states)
Canada add $25 for shipping
Gen 5 bolts (Zinc plated and 1 long bolt is black)
Gen 3 bolts (Zinc plated)
You pay PayPal 3% or friend / family transfer.


I DO NOT have complete kits, I just have intercooler cores, machined manifolds and bolts. Here is a list of what else is needed along with links of where to get it.

Yes, I see that. He just might have changed the prices. Hmmm.

Sent from my SM-N900V using Tapatalk

Originally Posted by ScottyDoggs

the price is all over this thread. first post has all you need to know. then hes got updates though all the pages



Gen 3 intercooler w/bolts and shipping $549(total price)
Gen 5 intercooler w/bolts and shipping $554(total price)
Machined Manifold $150 no core charge (shipping included w/ intercooler purchase)
Shipping, USPS (lower 48 states)
Canada add $25 for shipping
Gen 5 bolts (Zinc plated and 1 long bolt is black)
Gen 3 bolts (Zinc plated)
You pay PayPal 3% or friend / family transfer.


I DO NOT have complete kits, I just have intercooler cores, machined manifolds and bolts. Here is a list of what else is needed along with links of where to get it.

K. Thx. I will PayPal 2 sseilmnop.

Sent from my SM-N900V using Tapatalk

Sseimnop do u still make phenolic 1" spacers

Gen v with four nozzle locations for meth injection if u do that

Originally Posted by gambler87

Gen v with four nozzle locations for meth injection if u do that

you could do it yourself, it would be easy to pick 4 spots on the spacer for the injectors. personally, if I was going to do a direct port meth injection, I would do all 6, and I would do it one injector in each runner in the lower intake manifold, or in the spacer directly above each runner. otherwise, I would just do a throttle body spacer with the injector there.

on a different topic, I installed a coolant temperature gauge with the sensor in the front mount heat exchanger. the lowest temperature of the gauge is 100 degrees F. so far, after a couple days of driving the temperature gauge hasn't gone above 100. so either the gauge isn't working properly, or the intercooler is doing a very good job.

I was thinking of doing 4 nozzles under the blower and 1 thru

Originally Posted by SgtMarshal

you could do it yourself, it would be easy to pick 4 spots on the spacer for the injectors. personally, if I was going to do a direct port meth injection, I would do all 6, and I would do it one injector in each runner in the lower intake manifold, or in the spacer directly above each runner. otherwise, I would just do a throttle body spacer with the injector there.

on a different topic, I installed a coolant temperature gauge with the sensor in the front mount heat exchanger. the lowest temperature of the gauge is 100 degrees F. so far, after a couple days of driving the temperature gauge hasn't gone above 100. so either the gauge isn't working properly, or the intercooler is doing a very good job.

I was wondering if you ever got that finished. I'm not sure if a coolant temp gauge works the same way as a air temp gauge. I would think the coolant temp gauge needs to have liquid on it and are less sensitive to temp change.