Phenolic Intercooler for your Gen3/Gen5 M90, L67/L32 3800's - LOOK INSIDE

**redlinepontiac** · 05-31-2011

damn im excited now

**allmanallpimp** · 06-01-2011

looks nice

**ls1camino** · 06-01-2011

Looks good.

I thought the PCV wasn't fuctional with this, but I see Pure2sin doesn't have a breather or a line running from the TB to the Valve Cover.

I R Confused...

**Pure2sin** · 06-01-2011

Originally Posted by ls1camino

Looks good.

I thought the PCV wasn't fuctional with this, but I see Pure2sin doesn't have a breather or a line running from the TB to the Valve Cover.

I R Confused...

I didn't have it installed in the pictures but I did put a line from the oil filler neck to the North* throttle body.

**redlinepontiac** · 06-01-2011

did you just tap the filler neck? or does anyone know where you can get the pcv filler neck adapter from

**Pure2sin** · 06-01-2011

Originally Posted by redlinepontiac

did you just tap the filler neck? or does anyone know where you can get the pcv filler neck adapter from

I drilled and tapped the neck with a fitting yes. You should be able to pick a neck up from any junkyard or try to post up and see if anyone has an extra.

**sseilmnop** · 06-01-2011

I used 2 brass barbed fitting from autoparts store or Lowe's. They were 1/8" npt. Plastic filler neck is pretty easy to tap.

**sseilmnop** · 06-06-2011

bump

**redlinepontiac** · 06-11-2011

any gen Vs available?

**sseilmnop** · 06-11-2011

I have a gen 5 done and machined manifold.

**redlinepontiac** · 06-11-2011

i already have a machined LIM.
so i just need the plates and core, and bolts.

**sseilmnop** · 06-11-2011

Originally Posted by redlinepontiac

i already have a machined LIM.
so i just need the plates and core, and bolts.

I have Gen 5 bolts and intercooler. Match up your manifold to the outlet of the intercooler and open up to match.

**redgtp97** · 06-15-2011

Any available for gen 3? I might be interested in getting one soon.

**sseilmnop** · 06-15-2011

I dont have any gen 3's currently, can have one ready to ship in 10 days.

**redgtp97** · 06-15-2011

I don't need it now. Probably in a couple weeks. Ill let you know. But i'm def interested

**Pure2sin** · 07-06-2011

This is the stuff:

McMaster-Carr

Unfortunately they still leaked air. I had to RTV the gaskets on both sides to make them seal.

**GOTIT4CHEAP16** · 07-06-2011

what kind of rtv did you use and how to you spread it on the gaskets? Did you overlay it with ya fingers or just squeezed them out the tube? Im trying to seal my garlocs good. Might as well try that since making my own would still leak.