|
Same pin I did. Same picture I went off of
That I didn't see. If it said 85 I missed it
and likely on your relay it's A B C D ... I'm looking to see what 85 or 86 convert to.. bending either of those should do it
http://www.autoshop101.com/forms/hweb2.pdf
Letters, numbers... it looks like pin 1 or 2 need to be bent if you don't have an 85 or 86
here ya go guys
https://www.youtube.com/watch?v=q7TLIf5Yxyc
what do you think? fuel pump?
is it even relevant anymore? did you see the video i posted?
ok which one do i bend
Bend 1 or 2, whichever one will clear the relay next to it when you put it back in. Just took a pic.. will have it in a min one photobucket uploads
i was taking out the one on the left. was that the wrong one?
Going teh other way was going to hit the relay next to it.. I don't have a relay here to reference which leg it is.. try what mine looks like.
son of a B. i bent the tab and its running like a champ. so what is the official name of that part? can i run it like that for now or should i replace it sooner than later?
The part that's bad is teh fuel speed resistor.. GM relocated them to the top center of the firewall when they replace them. Cause behind a washer fluid tank is dumb.
Your fuel trims will be off, but it won't really hurt anything. You can either replace it or leave it..
« Previous Thread | Next Thread » |