Old Thread

[SpeedGrid]

Old Thread

[Slick2500]

Didn't you already make a thread asking this?

[Odi]

If still in doubt, lift up the car and look on the current bushings, they should have the size stamped on the side. If not, measure it yourself with calipers. I wanna say the front sway on the compg is 20mm solid, and if I were you, I'd just get a new dorman front sway (34mm solid).

http://www.gpona.com/forums/04-08-gr...ar-t24573.html

[91parkave]

Given that the comp G has better handling then standard 97-03 models id stick with your current comp g setup, no reason to change.

[Odi]

Given that the comp G has better handling then standard 97-03 models id stick with your current comp g setup, no reason to change.

Thats the difference between GT's and Comp G's, the better shocks and different swaybars. Not even comparing it to the 97-03 models.

[91parkave]

Exactly I am not changing out the sway bars. I just need new bushings as mine are shot. I can only find the Rear Bushings on but not the fronts.

The only rear bushings compatible with my car are these that I can find are these.

http://www.rockauto.com/catalog/more...167&cc=1429691

Now out of the three Moog bushings I listed which size if good for the front? If they are not compatible at all which bushings do you know of that I can buy for the front FE3 sway bar?

19.19 is the exact size but 19mm and 20mm will both work for the front, if i were you id get energy suspension bushings they have a grease fitting already installed, plus the polyurethane wont rot like rubber ones do.

[Odi]

if i were you id get energy suspension bushings they have a grease fitting already installed, plus the polyurethane wont rot like rubber ones do.

this.

[91parkave]

PN for 19mm=9.5156
PN for 20.5=9.5157

[spazzz]

Then like 11/16" / 17.5mm, 9.5155 for the back?

[91parkave]

Why would you replace inferior bushings with more inferior bushings

[ericspecullaas]

cuz he is speedgrid thats why

[HighOctaneRacing]

Dude get ES

[91parkave]

I gave you a es part number BTW

[HighOctaneRacing]

PN for 19mm=9.5156
PN for 20.5=9.5157

This is what you really want.

**** Moog! I had Moog bushings and that **** cracks/splits after awhile.

[Odi]

Everything is OEM.

It's GM... Energy suspension bushings are baller, they'll outlast anything oem/moog and aren't that much more.

[91parkave]

These won't drasticly change your ride quality or anything