if i come to a stop there is a clunking noise and i feel a bang coming from the floor. also going over bumps it clunks too. i have the GMPP/KONI struts, fbody brake upgrade, and a ZZP strut tower bar
|
if i come to a stop there is a clunking noise and i feel a bang coming from the floor. also going over bumps it clunks too. i have the GMPP/KONI struts, fbody brake upgrade, and a ZZP strut tower bar
lowered??
maybe bad cradle bushings?
Last edited by 98daytona500; 11-18-2008 at 01:07 AM.
CV joints?
Let us know what it is when you find out cause I think I'm having the same problem too.
Check them cradle bolts if you're under there.
i'd guess it's the strut bearings. but i went out and bought some for my car because it was doing the same thing and found out it was a broken coil spring. hopefully yours isn't that severe! iv'e also had cars in the past where i misdiagnosed it as a strut bearing and it was actually the end link of the sway bar like 59chevy said. good luck.
UPDATE!!!!!!!!!!!
turns out the sway bar endlinks were broken, i replaced the whole thing with the GMPP version. i also replaced the passenger side wheel bearing which was also shot. the car is much stiffer now and no more clunking
good! that was an easy fix (compared to strut bearings). i may have the same problem, i have a little clunking when i put it in reverse, and over some hearty bumps. i'll have to check my sway bar too.
sway bars right behind the end link connection is a weak point and seem to crack and break,
Hey was the noise like a rattle as if somethinq was kinda loose.?
« Previous Thread | Next Thread » |
Tags for this Thread |