if i come to a stop there is a clunking noise and i feel a bang coming from the floor. also going over bumps it clunks too. i have the GMPP/KONI struts, fbody brake upgrade, and a ZZP strut tower bar
|
if i come to a stop there is a clunking noise and i feel a bang coming from the floor. also going over bumps it clunks too. i have the GMPP/KONI struts, fbody brake upgrade, and a ZZP strut tower bar
lowered??
maybe bad cradle bushings?
Last edited by 98daytona500; 11-18-2008 at 01:07 AM.
CV joints?
Let us know what it is when you find out cause I think I'm having the same problem too.
Check them cradle bolts if you're under there.![]()
i'd guess it's the strut bearings. but i went out and bought some for my car because it was doing the same thing and found out it was a broken coil spring. hopefully yours isn't that severe! iv'e also had cars in the past where i misdiagnosed it as a strut bearing and it was actually the end link of the sway bar like 59chevy said. good luck.
UPDATE!!!!!!!!!!!
turns out the sway bar endlinks were broken, i replaced the whole thing with the GMPP version. i also replaced the passenger side wheel bearing which was also shot. the car is much stiffer now and no more clunking![]()
good! that was an easy fix (compared to strut bearings). i may have the same problem, i have a little clunking when i put it in reverse, and over some hearty bumps. i'll have to check my sway bar too.
sway bars right behind the end link connection is a weak point and seem to crack and break,
Hey was the noise like a rattle as if somethinq was kinda loose.?
« Previous Thread | Next Thread » |
Tags for this Thread |