Thread: Proportioning valve upgrade

Unruly how? Sorry I don't have any info for you, but I'm all for learning more!

Ahhh.. I was told that about doing the Fbodies w/o upgrading the backs. If you get too much front end dip and rear end lift..it'll happen.

I'm in to see if it helps.

Joy, something else to add to the list of things for my brake upgrade.

Sheffy! Get some part numbers on this stuff, will ya?

Not sure what the various amounts of part numbers will do without some direction.

Looking into the brake setups between my 99 and the 05s GXP and Non, there are no "proportioning valves" on the rear lines like ours. I believe its all done from the actual Brake Pressure Modulator Valve under the hood. Which being electronic with its own pressure sensor, will likely require a sensor change being added as I cannot find a sensor for the older body styles.

Was Logan meaning a whole new Modulator Valve, or the actual proportioning valves on the rear lines?

Hmmm the mystery grows!

Not quite yet. I still have some researching to do, just got busy at work and didn't get back to checking but I will when I can on Monday.

I spent a good amount of time looking over the options on the GXP and Non-GXP options on the 05 models and didn't get anything positive but still think it could be in another year model.

Ok, I'm out of places to go. Need to go back to the drawing board and/or talk to the guy who suggested it, make sure he was right about the car. 04+ as best as I can show on my catalog or find on Google does not use a Proportioning Valve on the brakes. I would guess that with the updates in technology, the Electronic Brake Control Module and Modulator Valve does its job well enough the need for the Proportioning Valves was no longer needed.

I even ran the part number for our body styles 98-03 and it didn't go much further than 03 across the board with Regals, Monte Carlos, etc...

Originally Posted by Logan541

Two people told me they suddenly lock up before the fronts

It's not true

I run that setup on both my cars. Never had them lock in the rear before the fronts..

I haven't had the issue either. I did have one person tell me to be careful of it happening.

ABS applies to the rear too on our cars right?

I would think something wrong with it if the rears are locking up, even after that kind of a brake upgrade.

So Sheffer the 04+ may or may not have rear ABS.

Yes though..the rears in my year have abs and the theory/warning I got was that the front drops enough that the rear comes up and doesn't get grip. I think the only issue would be when turning and hammering the brakes.