Ok I flipped my motor mounts last night & I found out while I was inspecting the mounts, that both my Dog Bones were bent towards the drivers side. (Guessing the PO hit something on the Driver side). I got the Dog bones back on, but the passenger side one was a PITA to get the bolt through the Bushing. I am probably just going to either order some Intense or ZZP Dog Bones, but my question is. What would bent dog bones cause. Because I notice my car vibrate over 50 MPH (it worst under acceleration). Although flipping the motor mounts made it a little better. Also will it make you fell you trans upshift & downshift. Also if I let off the gas quickly after accelerating it jerks me forward a little. I don't think it's trans related because I just replaced the trans & it was doing this before I replaced.
One more question.
Also sometime when if I am going under 40 MPH, and go 1/2 throttle you hear a clunk (that probably someting else).