Thread: 4" Rear Deck Speakers

the so called stock 6x9s put out so called bass...and the 4s put out highs...the type rs are good 3 way speakers.i left my 4s out when i replaced my 6x9s...just left a hole in back dash.if u do this and have a sub box.u will get much better bass response out of subs seeing is how the bass will have 2 more ports to escape out of.my opinion is leave the 4s out either way.i have memphis 5 1/4s and memphis 6 x 9s...and get all the high and mid i need outta them.

hey Ace. It's great to see another Gapper here.

Thanks gtpinsc, I installed my setup as you recommended.I was impressed by the difference these new speakers made. The only real problem i had was rewiring the front speakers.

Originally Posted by Aceoage

Thanks gtpinsc, I installed my setup as you recommended.I was impressed by the difference these new speakers made. The only real problem i had was rewiring the front speakers.

no problem man...im confused as to why u had wiring probs for front speakers...those were the easiest for me...they have the little connectors that just slide over the posi and ground contacts.did u run a amp to them?if so i see where ur comin from.

Yes i did, it was really a learning experience for me in wiring. Not I'm just worried about how the car will cope with the extra load.

Would a capacitor be fairly safe? A friend told me to use some fuseable links so a fuse would break when the load was too much.

Originally Posted by Aceoage

Would a capacitor be fairly safe? A friend told me to use some fuseable links so a fuse would break when the load was too much.

ye, when you buy the wires for the cap, make sure you have a 'Power distrubution box" thats were the fuses are.