|
|
03-23-2011
I bought my gp from A rycer. He had a pillar gauge with jdm guages. I want to remove them but I'm not sure how. I'm pretty good mechanically. but electronically, I got a negative IQ. Can someone please explain how to remove them? They're fed through the dash so I already know I have to pull that.
03-23-2011
What gauges are they specifically? Oil pressure? Boost? Volts?
03-23-2011
I'm assuing its an A pillar gauge, just pull the pod out. it should just have clips holding it in.
You shouldn't need to pull the dash to remove the wiring.
Originally Posted by W-Body Store
03-23-2011
if you are electrically dumb and dont want to screw anything up then cap off all the wires individually and tuck them up somewhere.
03-24-2011
The gauges are oil temp, boost and air/fuel. I would like to completely remove the excess wire cause even if there out of sight, it will just me nuts knowing they there
03-24-2011
besides the air/fuel gauge, the others are useful. id swap the air/fuel for something else and leave them there.
03-24-2011
Well there's a couple reasons I want to get rid of the gauges. One, the pod is an eye sore cause its warped. Two, the background says jdm in big highlighted colors. Last reason, the boost gauge says turbo right underneath the jdm logo.
I kinda wanna keep the boost and air/fuel. So I'm considering getting a dual gauge pod and switching out the gauges so they aren't import gauges. Then getting rid of the oil temp gauge all together
03-24-2011
replace oil temp with oil pressure
03-25-2011
I wouldn't be able to use the wiring from the oil temp for the oil pressure would I?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
