Hey everyone, I want to run this idea and get everyones opinion on it!

So here goes. My larger amplifiers I used to have were stolen and were replaced with smaller amps that don't look right where the larger ams used to be mounted.

Instead I want to mount both of my amplifiers to the trunk lid, one on either side of the lid with a centrally mounted engraved piece of acrylic that will hopefully look like this.

[IMG][/IMG]

Now I am sure your asking how I would mount such heavy items to the trunk lid. I have put some though into this. I am thinking about 3/8 or half inch plywood, something that will flex a little bit keep it tensile strength even when bent. I would bolt the plywood to the trunk lid which would give me a hard flat surface to mount both my amplifiers and imbed my plexiglass in the middle of the trunk. I would cover the whole thing with the charcoal carpet to match the trunk and hid all of the wiring underneath the plywood, in the frame of the trunk.

I know it seems optimistic but the more I think about it, the more I think I can pull if off, but If I cant make it look good, than I wont do it. I want everyones ideas on functionality, construction and appearance.
Thanks!