|
|
11-03-2009
I Started by taking the door pannel off and taking a mould
Then I make rings and boxes to house the sspeaker crossover and tweeter
Test fitting the mould into the door first look at the angles.
I tried putting GTP on it but i thought it looked bad.
The final product mounted
11-04-2009
Very nice man, i had 6.5 in mine before, then put 6 by 9's in the front, wish i coulda used a mould though. Nice project, how's it sound?
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-04-2009
It Sounds good There is dinomat on doors and all the speakers are amped up to 100 watts RMS so it bumps and is crystal clear. I love it alot more than my factory Bose.
basically i went from like 250 watts to 400 watts
11-04-2009
yeah, that's good man. what kind of component speakers are those? most 6.5 are rated 60 rms, but doesn't mean they can't handle more.
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-04-2009
They are the POLK DB series and they are 100 watt rms I picked them upp of pricegrabber.com after I listened to them at a car audi store.
11-04-2009
Nice man, i should have looked for better 6.5 before making a switch to 6 by 9's. Money is limited however, I wish i had the time to try a mould like that, Looks great!
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-04-2009
No... shoulda went for 8" subs for mid-bass in the doors.Originally Posted by pizzi22
11-04-2009
hahaha, funny story, i was just looking at 8" mid range today, Ones that hit crazy highs with little excursion. they can handle the power too. Only problem is space in the doors.
3.4 ZZP Modular Pulley, K and N FIPK, 180 t-stat, DHP V 1.0 PCM, Autolite 104's, Taylor 8mm Red Wires, SSAC Headers, Dynomax Tips, High-flow mufflers, Drilled and Slated Rotors, 13.5 Jl audio w6's, U.S. Amp MD3D, Lanzar 500x2, Blue Underglow, 3 Optima Red top batteries
11-05-2009
Build a box coming into the cabin off of the door. Not like anything uses that space anyways.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
