Hey guys, so this weekend im probably dropping a pulley size. Im going from the stock size to a 3.6. I was just wondering if i will need a new belt, and if so how difficult is it to replace. Thanks.
|
|
09-25-2014
Hey guys, so this weekend im probably dropping a pulley size. Im going from the stock size to a 3.6. I was just wondering if i will need a new belt, and if so how difficult is it to replace. Thanks.
09-25-2014
no need, im on the stock belt on a 3.4
09-25-2014
Do you have to do anything to the belt to make it fit?
09-25-2014
nope, it goes back on the same way it came off.
a 3.4 is smaller then a 3.6 so your pulley is just a bit smaller then a stock 3.8. it will just be a bit looser fitting.
09-25-2014
Is that gunna effect the efficiency of it at all?
09-25-2014
no. just use the stock belt, its more then ok.
09-25-2014
Ok great thanks
09-25-2014
Also, what tools will i need to take out the pulley?
09-25-2014
If its the stock pulley you'll have to buy or rent a pulley puller.
09-25-2014
Should you want it for this pulley, or plan on dropping sizes further, I have a one step smaller belt good for 3.3 through 3.7" pullies for sale. Let me know if you want it bud
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
