i have a stock series II n/a tune, can i run a l32 without the belt till i get it tuned? or at least to get the tune? or would i need to trailer her around like a slut?
|
i have a stock series II n/a tune, can i run a l32 without the belt till i get it tuned? or at least to get the tune? or would i need to trailer her around like a slut?
You can run it without the belt...and its probably a good idea until you get it tuned
Oh and![]()
![]()
http://www.grandprixforums.net/97-l32-camaro-40945.html
where iam at as of tonight is the last pic. 3 days of work on the car from when the car drove into the driveway lol. it would of been done if it wasn't raining yesterday.
Yeah you can run it with out the belt, just drive it easy.
You can run the blower without a belt, just dont get into the throttle at all.
Wait, you want to run an N/A series II tune on a S/C Series III motor? I think that's going to be a big problem. I could have read the OP wrong though..
How far will you be driving? and will you be doing highway speeds?
You should be fine to drive a few miles, with a very gentle foot.
Are you using GTP 33# injectors?
Yeah the PCM is set to run for the 1bar MAP. Use that until you can get it tuned...and again I urge caution on driving it.
If you do, make sure to be very, very gentle on the gas, dont want to **** up all that work.
But get it tuned ASAP, that way you can ring it out XD
I wouldn't do it but that's me. I don't like to take chances.
Horrible idea.
You will be throwing roughly 2x more fuel than you need to... I wouldnt risk washing cylinders running 33# injectors on a 18# injector tune.
You have to tune it anyway, so just wait till you "get it tuned", or find a stock GTP pcm.
« Previous Thread | Next Thread » |
Tags for this Thread |