Quote Originally Posted by 98ChainStretcher View Post
less than 2k thats for damn sure! lol
rough estimate here
300 gen5
200 60# injectors
50 2.8 pulley
2-300 headers (could be less but id try find a set of tog or slp headers)
150 s1x cam
125 105# springs
80? new single roller timing chain?
150 misc gaskets

I have hptuners and could copy my tune easily. mine is setup one pcm for e85 and throw a shorter belt on and 2.8 pulley, second pcm in the trunk with 3.4 pulley and longer belt. takes a fist full of tools and 15 min to throw a different lullet and belt on and 2 bolts to swap pcm. drive it anywhere ive swapped fuel in the gas station parking lot. no laptop or tuner needed if ypu have 2 pcms.....

where are you finding your stuff, the prices ive seen are 300 for a cam 4-6 for headers, 600 for a gen 5, the rest seem inline.
Id just like to know that could save me quite alot.
my "stage one" mods are gonna be headers/powerlog, CAI/cone (i need to do more heat soak research) downpipe, and a 3.4