What all needs swapped over? I know the basics like lim and gen v but I know the oil pan will interchange do I need to swap the oil pick up? Anything else?
|
What all needs swapped over? I know the basics like lim and gen v but I know the oil pan will interchange do I need to swap the oil pick up? Anything else?
04 still has metal oil pan.
I'd toss in a new rear main seal and put the 04 timing cover and oil pick up on this motor.
But other than the brackets and such its not much to change.
04 timing cover has bigger oil return or something right? I plan on regasketing everything so I don't have to worry about it for years to come.
Where can I get the cheapest whole gasket kit for a sc 3800?
rockauto will probably be my best bet. I need LIM, sc, tb, valve cover, head, timing cover, rear main, oil pan. and i think that's all right?
So you swap the lim, gen V into your motor ? Then dropping it in the comp g ?
Nope not TB gasket for us. Of course the head gasket should be replaced..I'm sure you could reuse it but for as cheap as they are I wouldn't. Remember you gotta get new headbolts.
i'll probably buy studs just in case.
I have comp cam bolts on my gtp I'm thinking pretty hard about stealing them off it to put on the comp g and putting stockers in the gtp.
Might as well but stock bolts in the GTP and comp cam in the comp g. GTP probably won't last as long as the comp g I imagine so the better parts should go in the comp g and ride the GTP to the ground.
« Previous Thread | Next Thread » |
Tags for this Thread |