Should work either way.
Mine are 1/2 and 1/2. Half of mine are facing one way on one side, the other way on the other side. I have made countless road trips far and near, and many passes down the 1/4 track at speeds in excess of 100 MPH. (who hasn't right)
Several oil chances since my build, and not a speck of copper in the oil. If it, the direction of the rods were wrong with my build, then I would be "panning for gold" by now with the copper from the bearings getting shredded to bits.
Like reptile said...its probably good either way you do it.
The L32 rod bolts shipped out today. I wish the box was bigger, I would have liked to hope in there and go with them. I'd like to go to Australia sometime.
~F~
