First off, this is me http://www.grandprixforums.net/you-e...ain-62729.html
I have a 2002 GTP and am ready to start modding. Here's what's happening in the next few weeks:
Terra 1.9 rollers/pushrods
LS6 lifters/springs (thanks Billy)
Manley retainers
fenderwell intake
3in. off-road downpipe (considering headers)
colder plugs
PCM Tune *
throttle body spacer
throttle body heat sheild
180 stat
new belt
3.4 pulley
new rod bearings (133,xxx..to be safe)
poly dogbone bushings (considering shortened dogbones)
Ok, now for a few questions...
I need to opinions on who I should have do my PCM?
Headers, of what's still available, who's have the easiest install and less prone to leaks?
I'm considering a ported TB....again, who?
Machined lower intake, intercooler, ported s/c....thoughts?
Long term...over the winter the motor's coming out for a full performance rebuild and head work, (Machined lower intake, intercooler, ported s/c) performance trans/converter/gears. Doing big brakes, suspension rebuild/upgrades, paint, and cosmetics (SD hood, halos, LED tails, wheels/tires, tint).
Any and all input is VERY welcome...thanks for reading!
