im getting the correct pin out for you right now. ill get the pin out for the Baro and the BBV
here is the pin out you will need. You will also need the connector the the Baro sensor, and the bbv sensor
When you pull the top cover off you will sell little numbers those are the pin out numbers.
IMPORTANT!!! before u re-cap the connector make sure i press down on all the pin to make sure nothing got pushed up!
Pin out for the Barometric presure sensor:
These wires will be going to the BLACK pcm connector:
Gray/Black wire to Pin 24
Black wire to Pin 20
Gray to Pin 17
Boost Bypass Solinoid:
These wires will be going to the GRAY pcm connector:
Gray Wire to Pin 38
Pink wire to a igniton wire which would be another pink wire. You will have to undo some of the plastic condut to revel wires.
If anything is wrong guys please correct me.
On our 04+ GTP the Map and the baro sensor have the same partnumbers.
