4060660 is the belt RockAuto said I needed, so I ordered one. It does NOT fit. Is the correct size for a stock setup the 667? I came across this in a post, but wanted to be sure before I order another.
|
|
09-30-2011
4060660 is the belt RockAuto said I needed, so I ordered one. It does NOT fit. Is the correct size for a stock setup the 667? I came across this in a post, but wanted to be sure before I order another.
09-30-2011
667 sounds right...
09-30-2011
667 or 670 will work. I'd err on the tighter side though
10-01-2011
It seems strange that all the belts listed were roughly the same length, by description. Apparently, they're all wrong. I usually get my belts at the dealer, but decided I'd try one of these Gatorback belts since the accessory belt is one.
Looks like the 667 is named on the Intense site.
Last edited by SnowDrift; 10-01-2011 at 07:44 AM. Reason: Add information
10-01-2011
FWIW I did actually get a 660 belt to work on a stock pulley. It's really tight and maxes out the tensioner but I was in a pinch and it worked just fine.
10-01-2011
660 is also what i am running on a stock pulley.. But it is a MAJOR PITA to get off and put on.
10-01-2011
This thing is just so tight that the only way I think it would go on is to "roll" it on and I didn't want to do that. Numbers are all worn off the old one, so I can't see what it is. I contacted the place I got the belt and asked if they would do an exchange. If not, then I'm sure I can move it on this site or on a popular auction site.
10-01-2011
yea I had to "roll" mine one too.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
