Okay I know this has been talked about before many times but never done.
I also know they have these in austrailia with decent success.
Basically what I am going to do is make a adaptor plate under my gen v to shove the air through a front mount and back to the motor much like a turbo.
If this idea sucks I will just go turbo and be done.
I have a plate fabbed up and im going to put this all on soon.
One possible drawback is boost loss. I run a 3.2 pulley right now with 11psi. When done I dont want to have to drop down to a 2.5" pulley to see the same 11 psi that would be gaining nothing for me. So I have to run as short of piping and as small of intercooler as I can while still being efficient.
I know there is a debate on air to air vs. water to air and I dont want that debate to make it in here.
All I want is ideas and opinoins on facts and not interested in well i know it wont work cuz i just know.
Ive been reading up on it for like a year and ready to try it.
When Im done ill be dyno'ing for before and after with what pulley drop I got. and the IAT sensor is going on the piping as it enters the intake manifold so I will have accurate data to the temp drop Im getting.
Just need ideas as to have enter and exit on what side do you guys want and so forth, as I will be selling these for much cheaper than the kits we can get now Im shooting for a $700 ballpark for a kit.
