Still doesnt mean its right though.
|
|
11-06-2011
Still doesnt mean its right though.
11-06-2011
he put a base tune and changed the tables for the injectors
11-06-2011
Odd.
11-06-2011
I think its from running it with a vac leak...Originally Posted by matt5112
11-06-2011
vac leak = lean.
not rich.
Did they all look the same?
If so, I'd venture to guess its in the tune.
11-06-2011
yea they did all look the same...
11-06-2011
I got my scan gauge I'm still trying to figure out all the stuff on it but heres a clip of the vac Idk If thats where I should be or not... on the fuel thing it just says 35
VIDEO0036.mp4 video by tmo333 - Photobucket
11-06-2011
you might not have a vacuum leak having a cam you won't have as much vacuum at idle.
11-06-2011
set it to LTFT bank 1 and STFT bank 1
Or O2 bank 1
11-06-2011
how do I do that I bought it used lol
11-06-2011
Hold both buttons to get into menu.
Then some parameter option.
then you select what you want to be able to view.
then it reboots, resets your annunciator, and you can now select your selected parameters from the scan feature.
This should help as well: http://www.aeroforcetech.com/files/I...AL_rev_2_8.pdf
11-06-2011
cool thanks and your pretty much right this is what paul had to say
The richness is due to it not being tuned properly yet. It was a real rough tune to get it running. After fixing the vacuum leaks, it is likely way to the negatives (probably pegged) on the fuel trims so it can't pull any more fuel out.
oh and I keep getting a 101 codw which is MAF or VAF A ckt range/ perf I don't know what that means I'm sure google will tell me but if any of you have experience with that code
11-06-2011
DTC P0101 Mass Air Flow (MAF) Sensor Performance
11-06-2011
so is it a bad sensor?
11-07-2011
Guess I could put the one from my old tb in there
11-07-2011
Taz..I found an engine bay that's super clean. I'll have to get ya a pic. That way when you finish up with wiring etc..we can see how yours compares.
11-07-2011
http://www.grandprixforums.net/ultim...ide-52020.html
http://www.grandprixforums.net/mass-...car-52226.html
I'd suggest using the Aerforce to see what the MAF frequency is at idle.
I was under the impression the PCM compares the MAF input to the VE table to decide if the MAF is working or not.
http://www.grandprixforums.net/ses-c...age-27572.html
The following are general possible causes:
Large Vacuum Leaks, split Intake Air Boot or PCV Hose, defective intake manifold gaskets
Mass Air Flow Sensor (MAF) Circuit and or wiring problems
Defective Barometric Pressure Sensor (possibly bad MAP input for GPs)
Dirty or Contaminated Mass Air Flow Sensing Wire or Filament
PCM software needs to be updated
11-07-2011
L67 and L36 have diff maf
11-07-2011
really cause they look exactly the same
11-07-2011
I'm pretty sure they are different
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
