all of this ontop of the gt1 cam I already have installed

Ported and Polished
L67 throttle body
l67 heads
L67 LIM
Gen 3 supercharger

Heads
90lb springs
New Valve seals
New valve retainers
Valve job

Short Stack Intercooler
Modded L67 Fuel rails for SSIC
42.5lb injectors
Speed Dady headers *looking in to getting them ceramic coated*
Stage 1 heat exchanger *If anyone knows of other heat exchangers not from zzp I'd like to hear about it*
SSM90 Belt setup with Modular system *I have my reasons*
3.4 pulley and 3.25 pulley *just going to order both now and start off with the 3.4 and see where that gets me then maybe keep the 3.25 for the track*

Gaskets and bolts
Felpro LIM gaskets
Felpro Head Gaskets
Reuseable rubber throttle body gasket
Injector Orings
Rocker install kit *includes vc gaskets and reusable rocker bolts*

not sure about the supercharger gasket I already have one brand new felpro gasket but I thought I needed to use 2 special garlock gaskets with the ssic, but I know some of you don't like those gaskets very much.

Coolant elbows
Arp head studs
Intercooler bolts
Arp header bolts

MISC
vaccum lines and Other wires don't know what all I'm missing yet
oil
oil filter
supercharger oil
dex-cool
Tr6 spark plugs
custom plug wires
stuff to move the coil packs
sealed and vented battery box
new coolant tank *preferablly polished aluminum*
Braided sleves to go over the coolant hoses *figured might as well do this now while most of the coolant is already out I might put these on more than just the coolant hoses*
All the stuff I need to make up some braided fuel lines
I'm sure theres more stuff that I'm forgeting hopefully by the time I start the tear down I'll have everythng I need so I can get it done in a few days and be ready for Kansas City

Polish and Paint
Supercharger polished
Intakre Manifold Polished
Throttle body Polished
Fuel rails Polished
T-stat housing polished
alternator bracket and tensioner assemblly Polished
Alternator polished
Oil filter bracket or w/e its called polished

every other metal party that had paint on it from the factory is getting redone I haven't desided on the color for sure, and I don't know about the valve covers yet but I might have something up my sleeve.

My goals for this are just make lots of powar, look and sound awesome, and get it done in time for KCGP11 It's going to be close but all the parts are finally starting to pile up and I'm feeling optimistic