I have diagnosed a recent exhausxt leak with seafoam in the intake. This loosened quite a bit of carbon, so I will be replacing my plugs.
My "mods" consist only of a 3.2 pulley. I run 85 octane pump gas.
Before you get into telling me I can't etc, I've been with this setup for ~2 years and 25k miles or so without incident.
My question now is what is the proper gap for my setup (not a tangent about the propriety of that setup)? Is 0.060" (stock) proper?
The plugs I'm putting in are here and I have them gapped @ 0.060".
The plugs I used before, also without incident, are here. They didn't require gapping, so I've not dealt with a gap issue post the 3.2 pulley.
Any advice is appreciated.
