Thread: Problem

Results 1 to 7 of 7
  1. #1 Problem 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,488
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    So i am having a little bit of a problem with the Prix. I have a 97 GTP... Pretty much stock. I am having a "stumbling" problem at low speeds. Almost like a mis-fire but am not getting an SES code for misfire. So last weekend I changed the plugs to the XP 606's. And I used Seafoam. (Seafoamed first) Hoping that would fix the problem. But no. My question is could my problem be caused by an EGR going bad? I am getting an EGR SES code from time to time. Something about a "PINTELL POSITION" or something. I also noticed while doing the seafoam that the EGR gasket is pretty much gone. Lots of smoke from around the EGR. My next attempt was going to be plug wires, but if it could be an egr I will just do an EGR delete.
    Reply With Quote  
     

  2. #2 Re: Problem 
    Perma-Banned! JK LOL Explicit_Spade's Avatar
    Join Date
    Dec 2007
    Location
    Omaha, NE
    Posts
    7,921
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Simple solution: Remove the EGR and delete the codes and see what happens.

    If unmetered air is leaking into the LIM from the EGR port, that's a vacuum leak and can cause problems.
    Quote Originally Posted by W-Body Store
    Remember, GM engineers didn't take into account your need for speed.
    Daily Driver: 06 Grand Prix GT / 9.4:1 CR / IS3 Heads / Ported Gen V / ZZP Headers / HPT Pro / Pulleys: 4.25, 3.8, 3.5, 3.4, 3.2, 3.0, 2.9, 2.7
    Projects: 86 Monte Carlo SS / 98 Sonoma / 74 Honda CB750
    Reply With Quote  
     

  3. #3 Re: Problem 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    If its smoking around the EGR, then its leaking there. Just remove it. If your not mechanically inclined and don't have a dremel to cut the factory brackets off the EGR tube, ZZP sells EGR block off plates. If you do have a dremel, cut the factory brackets off...RTV a penny in the back of each one...and bolt them back on.

    Done.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  4. #4 Re: Problem 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,488
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Quote Originally Posted by bluegtp91 View Post
    If its smoking around the EGR, then its leaking there. Just remove it. If your not mechanically inclined and don't have a dremel to cut the factory brackets off the EGR tube, ZZP sells EGR block off plates. If you do have a dremel, cut the factory brackets off...RTV a penny in the back of each one...and bolt them back on.

    Done.
    I am mechanically inclined.. Really never f*cked with emissions stuff before. I did the the how to on the EGR delete. But it didn't make any sense to me. I am willing to give it a go though.
    Reply With Quote  
     

  5. #5 Re: Problem 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    What part doesn't make sense?
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  6. #6 Re: Problem 
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,488
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Well I get the whole removing the EGR thing. Then it is pretty much all a haze.... LOL.. Just kidding. I think I get the jist of it. I pull the EGR and block off both tubes right?
    Reply With Quote  
     

  7. #7 Re: Problem 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Right...there are the 2 brackets that bolt to the back of the manifold and the LIM...you need those...you set a penny in the back of each one...RTV the crap out of the penny so it creates a seal, let it dry for a little bit...then bolt it back up to the manifold/LIM without the EGR/tubes. It'll throw a code, but it'll run better...plus you don't have all that hot exhaust gas going back into the motor...stupid.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

Similar Threads

  1. MAF problem- maybe?
    By Betsy in forum General Tech Discussion
    Replies: 7
    Last Post: 12-19-2010, 08:36 AM
  2. hid problem?
    By grand2000prixgtp in forum Visual/Body Modifications
    Replies: 6
    Last Post: 05-12-2009, 02:34 PM
  3. DIC problem
    By riceburner in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 12
    Last Post: 11-06-2008, 04:41 PM
  4. well now its a problem...
    By the1euge in forum General Tech Discussion
    Replies: 7
    Last Post: 10-26-2008, 01:43 AM
  5. AC problem
    By evilpacker in forum General Tech Discussion
    Replies: 5
    Last Post: 07-22-2008, 04:34 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •