Traction control is "handled" by the BCM/abs module, as in its enabled via a signal from one or both of those. Without this interafce you wont have traction control.But the GTP PCM you installed does have TCS.
I suggest you look into wiring that up or having it removed from the PCM.
Otherwise it'll pull fuel when it thinks its dumping boost when it attempts to turn on traction control.
Good chance you will have stalling issues on a FWD pcm without a functioning speed sensor setup. You should be able to wire it directly and just adjust it from there with a tuner.its ok, im running without a speed sensor, i cant wait to get this thing tuned.
NO, just no... You are not losing any power 'spinning ac' or 'spinning the blower faster'. When the AC compressor is on, it takes power, when it is off, it doesnt.but man its taking power away from my engine to spin that supercharger faster for no reason that's why i would like stock pulley. i drive the car allot man and the ac is always piping. lol ****ing spinning 2 compressors.