Thread: What supporting mods to run a NIC cam??

Originally Posted by 01GTP

For 2k in parts I would do:
headers
fs intercooler
tuner
pulley drop
port the superchager and tb while I had them off
and the other misc things t-stat, plugs etc. All said and done that would bring you close to 2k.

I agree this is prolly the route I'll be going but should have a little more room left with a 2k PARTS budget. I'd say about 300 for headers 700-800 for intercooler, tune I'll have to bring it some where prolly WI like Bio said, Ported S/C and TB and Heads will be done with the help of family. My uncles got a fully gasket matched and ported 396 in his 68 Camaro. Im pretty sure we can do a 3800. ZZP or other modular pulley should be around 150 or so that bring parts up to around 1150 to 1250. I still see room for rockers cam or both. Remember im not worried about gasket costs and other misc. stuff will certianly be needed.