Thread: About to order a BUNCH of stuff...need some opinions

Originally Posted by RooK

We've got a thread just recently about the EGR. Take a look at it. If you follow my method, you don't need to do anything to the PCM. If you disable it completely (disconnect and unplug it) you will have to remove codes.

I'm running on FelPro gaskets right now. No idea what they can hold, but I'm fine right now.

Well i would like to remove it compleatly because of the ic install and it possibly clogging the ic. so as far as blocking anything off in the lim or headers or anything...what needs to be done?...i will take a look at the thread anyway...thanks

ZZP 78mm polished TB ordered
S/C coupler ordered
MPS 3.2 ordered

S/C is inlet is being ported to match the 78mm TB
S/C outlet is being ported as well
S/C is being polished and snout bearings replaced along with the installation of the mps and the coupler.

All the above work is being done by brian (AKA reptile)


I also just ordered ---


al-104's
stock modified rockers
comp cams #105 springs
comp cams retainers
comp cams valve locks
new belt for the 3.2
FS Intercooler
prj fuel logs
pacesetter coated headers


So once everything gets back from being ported and polished the build will begin...If any one has any tips or tricks about anything that is about to be done be sure to let me know...or if you think i forgot something. thanks