First of all, let me apologize because I know this topic and information is spread all over the place. YES, I did search and read a lot but my issue is more that to get the information I want/need, I'd end up threadjacking and I don't want to do that. So please be patient with me because I'm just trying to be courteous to the other thread OP's.
I'd like my own thread because the questions and info are really going to have to be specific to my own car.
I have a 2000 GTP with 140K miles and she's still in pretty decent shape. Here are the mods so far:
2.5" SS Cat-back exhaust with resonator delete and high-flow mufflers
180* T-Stat
Autolite 605 plugs (1 range colder)
I had a CAI, but took it off because it was causing engine load probs and giving me TCC indecision issues.
I would like to drop to a 3.4" pulley, but I will never go below that. I'm planning on doing a U-bend delete before putting in the smaller pulley.
What supporting mods are absolutely necessary for dropping to a 3.4" pulley? Money is tight and I only have a little bit to play with so I don't want to go all out and go crazy or anything. I'm just shooting for the minimum necessary. I just want to know what mods will need to be done so that putting on a 3.4" pulley won't damage anything. I'm not looking to build a racer, but just something I can spank a ricer with when they get brave enough to try me.
Thanks for the help, all.
