Purchased kit 2 years ago, just now getting to install it. HAve help from a few people here in houston.
PCM is from an 04 or 05 and ZZP said it would work. Swapped everything and put in the PCM... it cranks but wont start. I read the pcm file to my laptop and looked it over... nothing looks out of the ordinary. All of the MAP, IPW, MAF, etc are correct.
Getting Spark, Getting fuel, Car just cranks and doesnt seem to want to start. There were a handfull of times that the car obviously got spark and it just stumbled.
L26 with L32 heads, LIM, and blower.
Pulled plugs, they were wet with gas, laid plug on rail cranked and it is sparking. Just not getting it to crank. any suggestions?
