|
|
08-23-2009
its the tube that goes to the throttle body to what i believe is a vaccum line its a wierd shaped line wtf can i get one at??? thanks guys. im thinking maybe ACE?attached is the pic thats guys.
\
http://i296.photobucket.com/albums/m...0/S5032979.jpg
http://i296.photobucket.com/albums/m...0/S5032981.jpg
connects to this..
http://i296.photobucket.com/albums/m...0/S5032982.jpg
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
08-23-2009
replace the whole thing going from the TB to the EVAP sensor with a good rubber hose...
08-24-2009
Get it from GM.
08-24-2009
Joe, that's the vacuum line that comes off a TB vacuum port and runs to your evap soleniod.
I'm on the side of rubber tubing. Cheap easy and effective.
08-24-2009
if you really need to ask us where to get a piece to replace that then i have zero faith in you when it comes to that motor running.
08-24-2009
Damn, LOLOriginally Posted by Bio248
08-24-2009
its a ****ing piece of rubber tubing, how hard is that?
08-24-2009
mine broke too..go to autozone and just get a piece of vacuum line and replace the whole thing from the throttle body all the way to the soleniod. mine is quite long as i got a three foot section and was too lazy to cut it short. lol
08-24-2009
no no no i didnt mean it how you guys though i did.... im just saying arnt the sides different size in diameter?
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
08-24-2009
thanks douglas
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
08-24-2009
i do what i can. its not much cause im pretty lazy but still. lol
08-24-2009
no as long as you get rid of the entire tube and run straight from the throttle body to the soleniod. i think the one took a little effort to put on all the way but it was a good fit.
08-25-2009
At most you need two size lines and one reducer. I got all fancy and used an old trans U bend tube I had laying around from a trans cooler.
Bio..that's harsh stuff man. I like your style.
08-25-2009
Wow, i didnt even know that pos existed. Mine was already upgraded to rubber line when i got it
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
