Thread: Whats Wrong Did I Blow It Up ?

i got the 75 wet shot but it just seems like its not spraying at all i got the kit with the WOT window switch and at WOT it pretty much feels the same i have no idea whats going on i got colder plugs and a t stat but it seems like its not spraying any ideas ? and now after trying to spray it my SES light was flashing at me and it seemed like it was miss fireing i have no idea whats up im pretty much stock except the cai plugs and t stat but anyone have any idea what that sputtering would come from im gonna run codes tomorrow cause the SES light finaly stayed on. did i blow it up ?

Well, What we talked about last night and I told you sounds like your not getting fuel and then someone saying if you spray over 50shot you will have issue with the fuel......well..I think you REALLY need to do that test I told you about! If you keep spraying your going to blow your crap up!

P577:

I am not a nitrous guru, but have heard enough about it to know that it is too hard to tamefor my patience.

Quite a few folks have done major engine damage by not having an intake that is compatible with NOS, and the result is that a cylinder or three leans out, and POW.

I commend your efforts to tread on these uncertain grounds which can be deadly to your engine in the quest for Mo power.

Don

get a progressive n2o controller, its pretty much idiot proof.

bottles are fun, if you use em right. what psi is the tank, that can be a major issue too

Originally Posted by FoSHO99

where is the "wet" shot spraying into?

Only babies use bottles, remember that!!! lol

the shot sprays behind the MAS but it shoots into the houseing of it.

still sputtering not only when im at WOT anymore it seems to be getting worse i have no idea codes still reading multipule missfires not sure why could my timeing be off or my ignition be mesed up i have no idea but the plugs are fine and could it have to do with the O2 sensor ?

SES light is on and it flashes ?

no idea what my bottle pressure is at but i got a window switch on the n2o and i won't spray until im at WOT and over 3 grand

Originally Posted by p5773566

the shot sprays behind the MAS but it shoots into the houseing of it.

still sputtering not only when im at WOT anymore it seems to be getting worse i have no idea codes still reading multipule missfires not sure why could my timeing be off or my ignition be mesed up i have no idea but the plugs are fine and could it have to do with the O2 sensor ?

SES light is on and it flashes ?

Wow. You were spraying nitrous directly into your MAS? What style of a MAS is it?

MAS/MAF = thin heated wire or wires... Air passes over them, and the computer calculates how much voltage is needed to keep the wire at the same temperature. Spraying nitrous onto that wire will freeze it, cause it to shatter, and suddenly, your MAS/MAF no longer works. Good job.