Thread: Yella terra's vs. zzp's modded rockers

TDC would you be against buying the yella terra kit for $90 off intense from the link I sent you?

Those are the stock ratio roller rockers. Plus they say that they are adjustable and need LARGER valve covers. I don't even know of a place where you can get larger 3800 valve covers...

well I want stock ratio because I plan to cam.... however yes... the custom valve covers is what did it in. I don't understand what is up with these yella terras? for another car?

Originally Posted by Quicklynx

well I want stock ratio because I plan to cam.... however yes... the custom valve covers is what did it in. I don't understand what is up with these yella terras? for another car?

Maybe from a LSx? But that can't be b/c the rockers are different...

HA!! Went to Yella Terra myself...but it says the same thing...

Yella Terra - Part details

So I found a pic of a adjustable one from a Holden V6...damn thing looks so ODD...

http://www.rocketindustries.com.au/i...rra/YT6312.jpg

I just dont understand why we have to drill and tap the stock ratio ones but not the higher ratio???

Originally Posted by Quicklynx

I just dont understand why we have to drill and tap the stock ratio ones but not the higher ratio???

I think you have to drill and tap your heads for the rocker arm bolts that fit that set. But I could be reading it wrong.

Originally Posted by Sabrewings

I think you have to drill and tap your heads for the rocker arm bolts that fit that set. But I could be reading it wrong.

They were saying you have to drill and tap the roller rockers in the back for the extra set of bolts so you can adjust them IMO...

yea.... I don't understand why unless these were made for another car...

Or maybe they are just saying you tap them due to your personal preference on where you want them tapped? Or maybe if you tap them at a different spot they are able to be adjusted for a higher ratio? Just a thought...

its decided. Im ordering these


Do you think its possible i can run a 3.6" or 3.5" pulley with these, the genV, and the N*?

Originally Posted by 99prixgt

its decided. Im ordering these


Do you think its possible i can run a 3.6" or 3.5" pulley with these, the genV, and the N*?

I'm barely thinking I'm going to squeeze out good timing on a 3.8". I've got a ported blower, LIM, TB, 1.9s, 42.5# injectors, Plog, DP, and Wizaired. That higher CR affects things a lot.

Originally Posted by Sabrewings

I'm barely thinking I'm going to squeeze out good timing on a 3.8". I've got a ported blower, LIM, TB, 1.9s, 42.5# injectors, Plog, DP, and Wizaired. That higher CR affects things a lot.

get headers and an intercooler...or meth..

Originally Posted by Bio248

get headers and an intercooler...or meth..

What happened to IC's are for girls?

Originally Posted by bluegtp91

What happened to IC's are for girls?

lol! Nick always changes his mind

so yella terras huh? nice

I've been running Intense Modded 1.9:1 Rockers since 2003 or 4. They've been great! These are the same thing as ZZPs, IWins, etc.

BTW, I strongly suggest upgrading springs when doing rockers. After putting 60,000 miles on my car with 1.9 rockers I had a stock spring break. Luckily I cought it before anything happened, then and there I upgraded to CC 105# Springs/Retainers. I could of easily dropped a valve and lost my motor. I somehow I got lucky. Keep in mind, I NEVER revved over 6K. Do some research on ClubGP, i'm not the only one I had this happen too, there are many more like me, although most didn't get as lucky.

The moral, when doing any kind of 1.9 rockers being stock modified or rollars, don't be a cheap ass, upgrade the springs/retainers and save yourself some trouble later on down the road...

Originally Posted by Iron Indian

I've been running Intense Modded 1.9:1 Rockers since 2003 or 4. They've been great! These are the same thing as ZZPs, IWins, etc.

BTW, I strongly suggest upgrading springs when doing rockers. After putting 60,000 miles on my car with 1.9 rockers I had a stock spring break. Luckily I cought it before anything happened, then and there I upgraded to CC 105# Springs/Retainers. I could of easily dropped a valve and lost my motor. I somehow I got lucky. Keep in mind, I NEVER revved over 6K. Do some research on ClubGP, i'm not the only one I had this happen too, there are many more like me, although most didn't get as lucky.

The moral, when doing any kind of 1.9 rockers being stock modified or rollars, don't be a cheap ass, upgrade the springs/retainers and save yourself some trouble later on down the road...

I don't see any point in going over 6k on my setup. I have L76 valve springs, Lsx style retainers, and viton valve seals to go along with the 1.9 yella terra's.