Thread: Follow Up to L36 to L26 UIM mod

Results 1 to 8 of 8

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1 Follow Up to L36 to L26 UIM mod 
    SE Level Member GT in Kennesaw's Avatar
    Join Date
    Sep 2008
    Location
    Kennesaw, GA
    Posts
    50
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    This is a follow up to my post Questions about swapping a L36 plastic UIM to L26 alloy. I've gone through 4 different plumbing configurations for the PCV air inlet (on top left of UIM). The first one was a total bust, didn't work correctly. The second one worked briefly but the parts I used split or leaked air. The third configuration worked perfectly, but I didn't like how it looked. The fourth and final one, works perfectly and looks great.

    This is the original setup. Do not repeat this mistake.


    This was the second attempt. I used plastic tubing and fuel line for the vacuum tubing. For whatever reason, real vacuum tubing cannot be found in the Atlanta area.


    This was the third attempt. I ordered an expensive silicone vacuum elbow and some HPS High Temp Silicone vacuum tubing. It worked great. I just didn't like the look.


    And finally, I ordered the stock L26 vacuum tube that would have been on a Series III engine. GM part #12596451.

    I cut the off the end that goes into the intake tube grommet.


    And in place. The "bumps" that are left on the cut off end makes a perfect barb end for the vacuum tube. Only 2 parts required, no clamps. Nice and clean looking— like a factory setup (my goal).




    I'm finally completely happy with my new setup. However, I neither recommend or discourage this mod. I don't believe it adds anything to the power, mid-range throttle response is pretty good (maybe no more than just cleaning the throttle body would get you), has a bit raspier sound (metal vs. plastic?) and didn't seem to effect the fuel mileage.
    Last edited by GT in Kennesaw; 05-26-2014 at 10:52 AM.
    Reply With Quote  
     

Similar Threads

  1. Illuminated entry/exit aka follow me home etc.
    By masterkevj in forum General Tech Discussion
    Replies: 5
    Last Post: 04-08-2011, 11:31 PM
  2. follow up on 98 gtp help tranny problem
    By daytonapacecarguy in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 0
    Last Post: 06-02-2009, 11:45 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •