|
|
06-23-2008
Hi everyone!
I seem to have a slight missfire more noticible durring highway driving. I have replaced the plugs, wires and fuel filter. Pcv seems to work fine. I checked the coil resistance quickly today durring my lunch and they all had simmilair values but one pack was lower than the other two. I was wondering if someone could tell me what range they should generally measure out to? Or if anyone has any other suggestions. Thanks!
03-05-2011
the test specs are 0.5 to 0.9 ohms for the primary terminals under the coil, and secondary resistance of 5,000 to 8,000 ohms at the high-voltage terminal.
03-06-2011
Should they be checked with the car running or off?
03-06-2011
To check the primary side, they have to be removed.
Oh, and if you want a 30,000 volt shock you'll never forget, ya check them with the car running!
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
