|
|
06-28-2009
just got a 1998 GT with the 3800 for $200.00 ! only thing is , it will not start. have done nothing to it but put in a fresh battery, will spin over fine, but no start. has 217,000 miles on it, put starting fluid in it and it back fired out the intake, i can here the fuel pump run...
06-28-2009
did it act like it wanted to run?
06-28-2009
plugs and wires might be totally fouled out...might try that or even a fuel filter could be clogged if it has that many miles on it.
06-28-2009
yes it acts like its hitting some, i took out number 1 plug, and it has gas and black stuff all over it ! going to get plugs and wires in the A.M.
pics of it...
06-29-2009
Interior looks good...just need to figure out what is wrong, debadge it, get some new taillights and tint them and the windows and have me detail it for you...it'll be the sex
06-29-2009
if you do get it running for cheap, it will be a killer deal
06-29-2009
got it started ! runs like sh-t, plugs where wet with coolant ! when it started it smokes bad white out the tailpipes....runs like dog, and no power......
im going with a bad intake gasket leak.....
06-29-2009
video....
06-29-2009
Yikes...all that smoke...looks like enough smoke to be a head gasket...
06-29-2009
looks like it was the intake gasket.....
looks like the TB is leaking to...
is this notch suppose to be there ?
all good for the new intake gasket...
06-30-2009
Awesome LOL Might as well tear into it the rest of the way and do it right while it is all off...get the Lower Intake Manifold gasket done too...if the Upper was that bad the lower probably needs it...
06-30-2009
where am i going to get all the stuff i need , and what all do i need ?
06-30-2009
Get them from a GM Dealership...the Aluminum Lower Intake Manifold gaskets...also pick up some new Coolant Elbows for the LIM whileyour there, just a few bucks. Get some red RTV to seal it up too...Should run ya around $50 or so...Originally Posted by pughman
06-30-2009
arent the plastic UIM's a common fail point?
06-30-2009
They tend to warp or crack...mileage honestly doesn't make a difference IMO...My Mom had a '03 LeSabre and bought it with 11K on it in '04...she never drives it so when I bought the GTP in early '07, I worked on it first (kinda like the test mule lol) and notcied her UIM took a crap on her and it only had a little under 26K on it at the time. Leaked coolant all over the rear manny. Swapped new LIM gaskets and put a new UIM on it and VIOLA!! Done like dinner
Last edited by blueguy; 06-30-2009 at 12:29 PM.
06-30-2009
Send a PM to Brian (Reptile).
x2 on the lower and upper replacement - might as well do it now. Don't forget to change the oil after you change the gaskets - use some low-grade dino-stuff at first, just long enough to circulate and warm up - and then change it and the filter again to a more...sophisticated brand.
I'd also run some Seafoam through that sucker when you get it all buttoned up...but that's just me.
Also - at the beginning of your video - it sounds like either the bendix didn't kick out all the way - or you (possibly) are missing a tooth (teeth) on the flywheel....but I'm old and my hearing isn't that great.
Good luck, and nice find!!
-Swash
- sold
06-30-2009
damn man, that is a nasty looking gasket, i need to do mine as well, and the valve cover gaskets, mine are shot
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
