Quote Originally Posted by jimcarey78 View Post
Hello,
Sorry for the late response. I starting working on the car again and this is what I have. I have spark at all 6 plugs (tested with a spark plug and clamp to ground) I have new wires, new coil packs, but no combustion. I can see the unburned gas on the cylinders. I have 45 PSI at the gas manifold. I have noticed some oil on the spark plug wires and a milky white substance outside of the engine. Any ideas on what will cause the engine not to fire? The only thing I have not checked is combustion.
I would check to make sure you have ample fuel pressure. Just because the cylinders are wet doesn't mean there is enough fuel to ignite and start the car. I would check your fuel pressure while cranking and make sure to have at least 45psi.