I was able to get most of them from Ebay for a lot less than if you bought them new. I did have to get a few tools from other sources on the Internet though. The resizing tools for the input/3rd clutch worked really great as well as the resizing tools for the turbine shaft. I was even able to find the bearing remover and installers on Ebay which also worked very well. And one tool that really helped was the clutch drum/final drive remover and installer since I had to pull the clutch assemblies out a few times to get the endplay correct. I was able to use a universal spring compressor, but had to make a slight modification for it to work on the input/3rd clutch springs. I hope this helps you out.Originally Posted by Taz Magester
Terry
