Multiple issues on 04 Grand Prix. Feeling aggrevated.

**Scottydoggs** · 01-26-2014

and how did you go about re splicing that abs harness? cut the wire back till you got to clean shinny copper wire, then soldered? or the old twist and tape?

twist and tape sucks if thats what happened. and that could be why the abs light came back on too.

**rs74** · 01-27-2014

I didn't have a solder gun so I used a crimp and seal connector. Heated the connector up to seal it off (like heat shrink) then used a dab of liquid tape to make sure the ends were sealed. I did strip it back to nice clean wire. I know its not the right way to do it but better than twist and tape.