Thread: P2135 code 2004 .....SOLVED

The cleanings didn't do it and I checked obvious wiring issues, none apparent.
Although I did find my TB gasket was seeping antifreeze so replaced that.

So screw it in the name of throwing parts.
I ordered a new Throttle body and pedal from Rockauto. At least the car is usable up to 70.
Keeping fingers crossed

The POS rips in its own little way again.

I replaced both parts, TB and accelerator pedal. Whichever one did it, no cares. I didn't want to dick around.

Now I am going to dissect the throttle body.

Glad you figured it out. I hope I don’t have to deal with this one day but sure I will.

Originally Posted by spazzz

Now I am going to dissect the throttle body.

When you get the black piece off the throttle, it looks sealed on the inside. There's like a lip or edge around the sealed up part. I chipped that away with a tiny screwdriver then you can look in there. Think I just glued it back shut, lol.

Originally Posted by SaukRapids

When you get the black piece off the throttle, it looks sealed on the inside. There's like a lip or edge around the sealed up part. I chipped that away with a tiny screwdriver then you can look in there. Think I just glued it back shut, lol.

Did you replace your throttle body?

Actually, no. I bought another throttle cus the car was hesitating a little under moderate load. WOT was okay. Couldn't figure it out.

Ended up putting the gasket back in even tho my coolant ports are blocked. "I'll see a leak if my dimes come out right away!" I thought I was so cool ..until that gasket made the car run again.

I'd taken the OEM one apart thinking it was bad. Cleaned it with a pink eraser/qtips/alcohol in there, and sealed it up.

That spare one's still on my shelf.