Quote Originally Posted by Fivefingerdeathpunch View Post
Not to be a douche here, but its not hard to fix them IF they end up getting condensation in them.

I've had my set for over 9 months now, never had a sinlge issue, fitment is fine and everything lined up, and if you are really concerned about fitment just swap the housing into your stock bracket and bam good as new.

And for 60 bucks its a steal compared to forking over a crap ton for new OEM lights.

Just say they end up getting condensation in them, take the capsule and bake it in a oven for 5-10min at 200º F ish and pull the lense off the capsule and get some sealant and seal them yourself and if you want to go a step further, drill a small 7/62nd hole in one of the corners in the front to vent air out and prevent future problems.

IMO its still a better option than OEM
no offense taken... this is an internet forum with open and constructive crticism..

but for buying something brand new, weather its 60 bux or 160 bux.. i should not have to do anything to them to either fix condenstaion, or prevent it.. i didnt pay for a problem.. i paid to fix a previous problem i had... and i did the factory bracket swap.. i still had problems... i guess chalk it up to a bad ebay store... this was just my experience with things... out of the thousands of cars on the road.. and thousands of aftermarrket parts.. something is bound to go wrong at some point... that something, was my head lights and corner lights..

but like i said.. lesson learned for me...