just finished my SC a few days ago, the TB too.
Here's a few pics... Just cleaned it real good (brake cleaner works well) and let it dry good too. Then mask off any openings, take your time here. When applying the paint, use HIGH HEAT ENGINE paint... (I used Dupli-Color Ceramic Engine Paint)... Go real slow, many light coats are better than one heavy and the Ceramic Paint is real THIN too so will run easy - a light touch is needed. It dries pretty fast, I did 3 light coats about 15 mins a part, then one heavier coat an hour or so later and all was done.
Finished product with new pulley and all parts back on as well
